Showing posts with label Process Temperature Maintenance. Show all posts
Showing posts with label Process Temperature Maintenance. Show all posts

Wednesday, 3 December 2014

Compound Feed Engineering, Haydock Plant

Type VCBOJ20/2 constant wattage heating tape was supplied and installed in order to maintain a stainless steel pellet mill door at +80°C. The trace heating circuit was controlled using a DTC digital thermostat.

Monday, 27 October 2014

Jobling Purser Asphalt Plant, Newcastle-Upon-Tyne

As a highway maintenance specialists, Jobling Purser develop and manufacture a wide range of products used around the world. ESH designed, supplied and installed a trace heating system to maintain a 4" steel bitumen line at +80°C. 

In a minimum ambient temperature of -20°C, over 300 metres of type SC constant wattage heating tape was triple traced to the underside of the pipework in order to maintain the required product temperature.

Monday, 8 September 2014

Amtico Ltd, Head Office Coventry

ESH designed, supplied and installed a process temperature maintenance trace heating system to stainless steel pipework containing Plasticiser. The pipework required maintaining at a temperature of +25°C in a minimum ambient of -20°C.

Thursday, 10 July 2014

Jobling Purser, Newcastle-Upton-Tyne

ESH supplied and installed a high temperature trace heating system to temperature maintain the Bitumen tank line pipework at +145ยบC. Type SC constant wattage heating tape was straight traced five times along the pipework length to achieve this high temperature. 

Tuesday, 14 January 2014

Fox's Biscuits - Uttoxeter

Within Fox's food manufacturing unit, ESH were contracted to design, supply and install two separate trace heating systems:
  • System one was the temperature maintenance of a large vessel at +40°C
  • System two required the heat raising of a vessel from a starting temperature of +5°C up to +40°C
Both systems were designed using type VCBOJ constant wattage heating tape. 

Wednesday, 8 January 2014

Rumenco, Burton on Trent

For this process temperature maintenance application, ESH designed, supplied and installed a trace heating system to a stainless steel tank containing molasses. The 1.22m diameter x 1.37m tall steel tank, needed to maintain a temperature between +60 to +70°C.